5 Tank Oil Checks You Should Carry Out Before Winter Begins

5 Tank Oil Checks You Should Carry Out Before Winter Begins

With winter almost upon us, it’s time to start making some final preparations for the colder months ahead. One of the most important things to do before winter arrives is carry out some checks on your oil tank and your heating system as a whole. Here are five tank oil checks you should carry out to ensure your oil tanks and domestic heating oil shropshire are in good working order.

Consider A Professional Inspection

If you haven’t had your tank inspected oil distributors conwy, such as a registered technician, you should do so at least once per year. In the event you fail to follow these steps, your tank’s warranty will be voided.

In most cases, the technician will also perform any necessary maintenance on the tank.

Remove Any Debris  Around Your Tank

To make sure your tank is in good working order, it’s best to carry out some checks before the busy winter season. Make sure there is no debris or plant waste around the tank, and ensure that it has the correct oil levels – if you’re unsure how to check your oil levels, consult your manual. If you have a water filter on your tank, also make sure this is clean and working well.

Remove Plants

Tanks need to be on a level surface and in an area that is well-ventilated. Plant growth can restrict the airflow and make it difficult for your tank to operate efficiently. If you want plants near your tank, make sure that they are more than 60cm away from the unit.

Check Vents And Fill Points Are Free From Any Obstruction

It is important to make sure all your vents and fill points are free from any obstruction. This is especially the case when you are carrying out oil checks. If something has been blocking the vent then it will affect how much air can get in and out of the tank, which could lead to a build-up of pressure. This could eventually lead to an explosion so make sure that there are no obstructions in these areas.

Double-Wall Heating Oil Tanks | Roth North America

Check All Caps, Vents And Lids Are Present And Working

It is vital to ensure that all the caps, vents and lids are in place and working.

This is because if any of these elements are damaged or broken it could lead to a tank over-pressurising and causing an explosion.

When checking the vents, make sure they are not clogged with dirt and leaves as this will prevent air from entering the tank.

If you notice there is oil leaking from one of these elements it may be necessary to replace it before winter arrives.

Check The Surrounding Ground

Checking the ground around the tank is important as oil leaks can be hidden leaves and other debris. If you don’t see any leaks, you should dig down a couple of inches to check for any oil seeping through the dirt.

Aaron Bascom

Aaron Bascom